| Customization: | Available |
|---|---|
| Sterilization: | Non Sterilization |
| Feature: | Reusable |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction
GP-110A Infusion Warmer is a 'dry heater' , which does not directly contact the heated liquidin working process. lt transfers heat from heat exchanger through infusion tube to liquid inthe pipe to achieve the purpose of continuous heating to flowing liquid. The operator can adjust the setting temperature in the range of 35ºC~ 42ºC according to actual needs, and the heater can automatically work to the preset temperature with the built-in intelligent chip and maintain the constant temperature state after reaching the target temperature.
Features
1.Compact size,better appearance
2. More accurate temperature control
3. Easy to use and operate without training
4.35ºC~42°C temperature range adjustable, more practical
5. Two attaching methods on l.V. stand with lanyard and bracket
6. Three lengths (25CM, 31CM, 52CM) of heating groove design to make infusion heating more flexible
7. Over-temperature protection, five alarms including high and low temperature alarm, safer and more reliable.
Specification
|
Device Dimension
|
180mmx70mmx35mm
|
|
Weight
|
≈0.2KG (without knob); 0.4kg (with knob)
|
|
Display Type
|
Led
|
|
Applicable lV set
|
Exclusive lV Set or standard single PVC l Set (20 and 60 d/mL,with outer diameter 3.4 ~ 4.5mm) |
|
Temperature Range
|
35ºC~42ºC(95~107.6F),0.1ºC increment
|
|
Optional Unit
|
(ºC)and(ºF)
|
|
Temperature Accuracy
|
±1'ºC or±1.8ºF
|
|
Warning up time
|
≤2min
|
|
Overheat Protection
|
48°C
|
|
Alarm
|
Overheat, low temperature, system error, door open, heating reminder
|
|
Input Voltage
|
100-240V
|
|
Frequency
|
50Hz/60Hz
|
|
Power
|
85VA
|
){kind=link}